Sika - waterproof repair material reinforced with SikaBlackseal-301 fibers
Price on request
Product description
Fiber-reinforced, solvent-based material for waterproofing and repairing scratches on bituminous membranes, brick, concrete and mortar. It does not contain asbestos. Apply with a trowel.
Features
- ease of application
- can be applied with a trowel or putty knife
- delivered ready to use
- resistant to UV radiation
- does not run off vertical surfaces
- flexible, even at low temperatures
- ability to absorb scratches on the substrate
Technical data
- color / form black paste
- chemical base bituminous mass containing a solvent
- density 1.20-1.30 kg / l
- setting speed surface dry after 2 hours at +20 C (depending on the ambient and substrate temperature, relative humidity and coating thickness)
- solids content ~ 37% (by volume)
- volatile compounds in organic (VOC) ~ 15% (by volume)
- bitumen content in ~ 50% (by volume) solids
- coat thickness up to 5 mm
- service temperature minimum -30 C / maximum +70 C
- watertight up to a pressure of 0.50 bar
- high temperature behavior - softening point (ring and ball method)> 170 C (dry coating)
- Crack bridging capacity <2.0 mm (unreinforced coating) at +4 ° C
- resistant to fresh water, sea water and humic acids (from soft groundwater)
- consumption ~ 1.20 kg / m 2 / mm of layer thickness
- application conditions: substrate and ambient temperature minimum +10 C / maximum +35 C; substrate moisture <3%
- storage conditions - product stored in factory-sealed, original and undamaged packaging is best used within 12 months from the date of production; protect against heat and direct sunlight
- package 5 kg